IC 555 Timer Based Mini Flasher Circuit makes LED blink light with a set speed. This circuit often uses for signal, indicator and hobby projects. IC 555 timer work in astable mode to give pulses all the time. We can change blink speed with a potentiometer. The circuit power it with 6V battery or 6V […]
LED and Lamps
Home » LED and Lamps »
Simple Micro Flasher Circuit using IC CD 4093
Simple Micro Flasher Circuit using IC CD 4093 is easy way to make LED blink for many indicators. CD 4093 has four NAND Schmitt trigger gates inside. It runs on 6V battery and need few parts only which is very simple and good. Flashing happens because one NAND gate turn LED ON and OFF steady. […]
PWM Based Lamp Brightness Controller Circuit
The circuit control lamp brightness with PWM. It is good for adjusting incandescent lamp light. It uses 555 timer as astable multivibrator to control low-power lamp. PWM controls power to lamp and changes brightness easily. This PWM Based Lamp Brightness Controller Circuit runs on 6V battery and works for many lighting needs. Circuit Working: Parts […]
Rotating LED Array Circuit using IC 555
Rotating LED Array Circuit using IC 555 works like LED flasher and make cool rotating light if LEDs are set right. This is simple project to make but works good. We can use this circuit for decoration, emergency light or alert. This circuit gives two IC 555 pulse signal and LEDs flash in pattern. The […]
PWM LED Ramping Circuit (Slow Bright, Slow Fade)
PWM LED Ramping Circuit (Slow Bright, Slow Fade) make LED light go bright slowly and with not sudden ON/OFF This circuit is good for signal, decoration and for soft light. It uses 2× IC 555, LM393, 2N7000 MOSFET for smooth change. The circuit works best with 3 to 12V power with 6V is best. Circuit […]
Automatic Night Lamp Circuit with Photocell
Automatic night lamp use photocell to check light or dark..When dark the lamp is ON. When light the lamp goes OFF. It is good for street, garden and security lights. Parts used in circuits are LDR (ORP12), op-amp (uA741), relay which controls the AC lamp. Low light makes relay ON and lamp ON. This Automatic […]