Site icon Circuit Ideas for You

Simple LM317 Audio Amplifier Circuit

This LM317 audio amplifier circuit is like a secret hack for your speakers.

The LM317 chip is normally used to control voltage, but in this circuit it acts like a simple amplifier booster for your music.

It is not the most powerful amplifier out there, but it is a clever way to get a little more volume out of your audio source.

While it can work, this type of circuit might have limitations compared to dedicated audio amplifiers.

It is a good learning project but for serious audio needs a different amplifier design might be better.

Circuit Working:

Parts List:

ComponentDescriptionQuantityPower Rating
Resistors470Ω11/4 watt
10Ω11/4 watt
Potentiometer5k1
CapacitorsCeramic 0.22µF1
Electrolytic 10µF 25V1
Electrolytic 470µF 16V1
SemiconductorsIC LM3171
Speaker1

The audio signal from the input source e.g. smartphone, MP3 player is fed into the LM317 IC through a coupling capacitor 10µF 25V.

This capacitor blocks any DC voltage from the input source allowing only the audio signal to pass.

The LM317 is configured as a constant current source where the output current is set by the 5k potentiometer variable resistor.

This resistor adjusts the biasing of the LM317 controlling the current flowing through the amplifier circuit.

The LM317 also acts as a voltage regulator maintaining a stable output voltage across the 10Ω resistor or at LM317 pin 2 out at around 4.5V.

This stable voltage is crucial for proper operation of the amplifier circuit.

The amplified audio signal is then coupled to the speaker through a coupling capacitor 470µF 16V.

This capacitor blocks any DC voltage at the output ensuring only the amplified audio signal reaches the speaker.

The class A amplifier design provides a maximum output power of around 1W.

While this may not seem like much compared to other amplifier classes class A amplifiers offer high quality audio reproduction with low distortion.

Overall, this LM317 based class A audio amplifier provides a simple and cost effective solution for low power audio amplification with good audio quality.

Formulas:

The above circuit uses the LM317 voltage regulator integrated circuit to create a basic audio amplifier.

Although its main function is voltage control, the LM317 may also be utilized as an amplifier in some setups.

Power output:

The following formula can be used to estimate the maximum power output.

Pout = (Vrms2) / R

where,

Note:

Efficiency losses are not taken into consideration in this calculation, which only offers a ballpark estimate.

To improve performance, think about utilizing an IC specifically made for amplifying audio.

Usually, this would result in improved efficiency, less distortion, and increased power output.

How to Build:

To build a Simple LM317 Audio Amplifier Circuit follow the below mentioned steps:

Circuit Design:

Circuit Assembly:

Finalization:

Note:

Remember to exercise caution when working with electrical components and circuits.

Conclusion:

In conclusion, the LM317 audio amplifier circuit is a straightforward and cost effective solution for amplifying audio signals in low power applications.

By configuring the LM317 as a linear amplifier in class A mode it can deliver good audio quality with low distortion.

However, it is important to use a suitable heatsink to dissipate the heat generated by the LM317 to ensure reliable operation.

References:

Datasheet IC LM317

Simple Class-A Amplifier with an LM317

Exit mobile version